Bolted Type Mechanical Cable Lugs
Bolted type mechanical cable lugs Technical Requirements Material: A1-99.5%, Cu-99.9% Surface treatment: Acid cleaning Product property: It use spanner instead of hydraulic tool to finish installation. The special eccentric design for round conductor ensures enough anti-wrench strength and…
- Description
- Datasheet
- Contact Us
Bolted type mechanical cable lugs
Type No.:AUL
Number of Bolts: 2 Bolts
Material:A1-99.5%, Cu-99.9%
Conductor Cross-section:16-35mm2,50-70mm2,95-120mm2,150mm2,185mm2,240mm2.
Surface treatment: Acid cleaning
Product property: It use spanner instead of hydraulic tool to finish installation. The special eccentric design for round conductor ensures enough anti-wrench strength and conductivity. The bolt has two shear ends A and B(Note: A is shorter than B). The bolts and nuts are specially designed to install on large range of conductors. When installing, you can choose the suitable end and tighten it until it breaks. The barrel capped is filled with joint compound to avoid oxidization. and its type test is in accordance with IEC61238-1.
Type | Conductor Cross-section(mm2) | Dimensions | Size of bolt | Number of Bolts | ||
b | l | AF | ||||
BMC 25/95 | 25-95 | 24 | 60 | 13 | M12 | 2 |
BMC 35/150 | 35-150 | 28 | 80 | 16 | M16 | 2 |
BMC 95/240 | 95-240 | 33 | 125 | 19 | M19 | 4 |
BMC 120/300 | 120-300 | 37 | 140 | 24 | M12 M16 | 4 |
BMC 185/400 | 185-400 | 42 | 170 | 24 | M24 | 6 |