CAL Bimetal Cable Lugs Manufacturers
CAL bimetal cable lugs manufacturers Material: E-Cu; Al-99.6% Technical Requirements: 1.Due to the coupling effect when Aluminum Comes in contact with copper, corrosion will happen in the short time. The best solution is to use aluminum-copper bimetal connectors. It is according with IEC…
- Description
- Datasheet
- Contact Us
CAL bimetal cable lugs manufacturers
Material:E-Cu; Al-99.6%
Type No.: CAL-A or DTL-2
Suitable conductor:16mm2,25mm2,35mm2,50mm2,70mm2,95mm2,120mm2,150mm2,185mm2,240mm2,300mm2.
Technical Requirements:
1.Due to the coupling effect when Aluminum Comes in contact with copper, corrosion will happen in the short time.The best solution is to use aluminum-copper bimetal connectors. It is according with IEC 61238-1.
2.The transition section between aluminum and copper is produced by friction welding, bending 180°,no breaking weld.
3.The marking should be clearly, well-proportioned with the depth of 3mm;
4.Closed angle and edge curl are not allowed at the mouth of the pipe
Type No | Main Dimensions(mm) | ||||
Φ | D | d | L | L1 | |
CAL-16A | 11 | 16 | 5.5 | 83 | 42 |
CAL-25A | 11 | 16 | 6.5 | 83 | 42 |
CAL-35A | 11 | 16 | 8 | 83 | 42 |
CAL-50A | 13 | 20 | 9 | 90 | 43 |
CAL-70A | 13 | 20 | 11 | 90 | 43 |
CAL-95A | 13 | 20 | 12.5 | 90 | 43 |
CAL-120A | 13 | 25 | 13.5 | 115 | 60 |
CAL-150A | 13 | 25 | 15.5 | 115 | 60 |
CAL-185A | 13 | 32 | 17.5 | 125 | 60 |
CAL-240A | 13 | 32 | 19.5 | 125 | 60 |
CAL-300A | 13 | 34 | 22.5 | 135 | 62 |