Aluminum Straight Line Dead End Strain Clamp
Aluminum Straight line Dead End strain clamp Application: For dead ending distribution and light transmission construction with all aluminum, ACSR or aluminum alloy conductor. Features: These clamps have high holding power and large range taking ability. Straight-line design, with hot stick…
- Description
- Datasheet
- Contact Us
Aluminum Straight line Dead End strain clamp
Type No.: NLZ-L or NLZ-E
Body strength: 30KN,40KN,45KN,18KN,27KN
Application: For dead-ending distribution and light transmission construction with all aluminum, ACSR or aluminum alloy conductor.
Features:
These clamps have high holding power and large range taking ability. Straight-line design, with hot stick lifting-eye, pulling-eye, and captured, angled U-bolts, facilitates installation and maintenance, especially on hot-line work. Snub-pocket V-shaped, range-taking conductor groove and galvanized steel U-bolts provide high holding strength.
Material:
Body and Keeper: aluminum alloy.
Hardware: galvanized steel.
Sockets and Clevises: ductile iron, galvanized.
Cotter Pin: stainless steel.
NOTES:
1. It usually use with fitting like clevis and socket eye, need order separated, you can add Suffix Q for Clevis Fitting.(Type Q-U) and add Suffix W for Socket Eye Fitting (W Type).
2. Accommodates compressed conductors within diameter range.
Material: Ductile iron, galvanized.
Application: For distribution and light transmission construction.
Material:
Body and Keeper: aluminum alloy.
Hardware: galvanized steel.
Cotter Pin: stainless steel.
